TX6000 Graphical Time Domain Reflectometer and Toner

		Test & Measurement Devices			email us now!

TX6000

ISO9001
IEC61010-1
BS/EN61326
EN60950

GRAPHICAL TIME DOMAIN REFLECTOMETER &
CABLE FAULT LOCATOR
6KM RANGE TDR/TONER WITH USB 2.0 INTERFACE
& TRACEXTRA SOFTWARE TO DOWNLOAD/ANALYSE TRACES

Description

Features

Specifications

Package Contents

Price

Delivery Options

TX6000 Description

The TX6000 is a hand held Time Domain Reflectometer with 11 range scales covering the range 0-6000 meters, with a 7 meter first range scale and a 0.5 meter dead zone. Near and far end faults are clearly displayed on its 128x64 pixel back light Liquid Crystal Display.

USB 2.0 interface with Windows compatible software "TraceXtra" gives the user an option to download and analyse saved traces to a windows PC. Also the interface allows the user to upload saved traces from PC hard disk to the unit. New firmware upload feature gives the facility to update the unit (TDR) with recent additions.

Designed for identifying and locating faults on all metallic cables with two or more insulated conductors. The TX6000 has impedance matched circuits for 25, 50, 75 and 100 ohms and with velocity of propergation settings from 1-99% (or the equivalent in feet or meters/micro second) will cover the range of power, data, communication and CCTV cables.

Housed in a rugged IP54 rated ABS enclosure and weighing only 350 grams (12 ounces), the TX6000 is suitable for outside use.

TX6000 Features

USB 2.0 Interface with Windows compatible software TraceXtra to download/analyse traces
Rugged Palm-Top design
Weighs less than 350g (12oz)
11 Measurement Ranges up to 6000m (6km)
25, 50, 75 & 100ohm Selectable Cable Impedance
Memory capacity up to 50 saved traces
Built in Tone Generator for Pair Tracing and Identification
Suitable for testing all Communication and Power Cables
Environmental Protection IP54
CE Approved
Soft bag & Test Leads

TX6000 Specifications

Ranges @ Vp-70%	Meters: 7, 15, 30, 60, 120, 250, 500, 1km, 2km, 3km, 6km Feet: 23, 49, 98, 197, 394, 820, 1640, 3280, 6560, 9850, 19000	Power Supply	6v (4 x AA cells)
Range Selection	Manual range control	Power Down Selectable	1, 2, 3, 5 minutes or disabled
Resolution	Approximately 1% of range	Backlit Display	128 x 64 pixels
Accuracy	1% of selected range*	Voltage Detection	250 volts AC
Sensitivity	min 3 pixel return at 4km on 0,6mm, PE, TP	Storage Temperature	-20 to 70 deg. C
Velocity Factor	Adjustable from 1% to 99%	Operating Temperature	10 to 50 deg. C
Output Pulse	5v p-p into open circuit	Dimensions	165 x 90 x 37mm
Output Impedance	Selectable 25, 50, 75 and 100 ohms	Weight	350gms (12oz)
Output Pulse Width	3ns min to 3ms, automatic range	Water/Dust Proof	IP54
Scan Rate	2 scans / second or scan held (not on 3km/6km range)	Safety	IEC61010-1 EN 60950
Tone Generator	810 - 1110 Hz	EMC	BS/EN61326-1
Battery Life	60 hours continuous scanning

*Measurement accuracy of +/-1% assumes the instrument setting for velocity
of propagation (Vp) of the cable under test to be accurately set, homogeneity
of the Vp along the cable length, and accurate cursor positioning.

TX6000 Package Contents

The TX6000 comes with USB 2.0 interface and Windows compatible software: "TraceXtra"

TX6000 Price: £ 840 GBP + Delivery + VAT

TX6000 Delivery Options:

Next day courier to a UK address (by 4.00pm): £8.50 (for one unit)
Next day courier to a UK address (by 4.00pm): £10.50 (for up to 10 units)
First class postal delivery to a UK address: £6.00 (for existing customers only)
Airmail postal delivery to an EU address: £8.50 (for existing customers only)
Courier delivery only for non EU countries

All prices exclude VAT
VAT does not apply to countries outside of the EU as local taxes apply.
Quantity orders are only shipped using a next day parcel service.

TX6000
GRAPHICAL TIME DOMAIN REFLECTOMETER
& CABLE FAULT LOCATOR
6KM RANGE TDR/TONER WITH USB 2.0 INTERFACE
& TRACEXTRA SOFTWARE TO DOWNLOAD/ANALYSE TRACES
"The smallest graphical TDR's in the world"

Top