LanCaster ProST
Structured Cable Fault Locator
downloads 1000 test results with
multi-lingual customisable certification software
     
 


LanCaster Pro ST Structured Cable Tester & Troubleshooter
"The only wire map tester in its class that stores and provides printed test reports"

The Lancaster ProST is a low cost wire map tester which tests and certifies structured cabling continuity to TIA568A/B, USOC and ISDN standards.

The Lancaster ProST displays on-screen wiring configurations showing the length of all 4 pairs and length of pair to fault up to 150m (500ft).

The Lancaster ProST will store up to 1000 test results which can then be downloaded to PC using the Lancaster ProST software (provided). Test results can then be customised with your corporate identity and certificates produced displaying customer's location/job length, cable VP and testing standard.

Maintaining all the proven features of the standard Lancaster, the ProST identifies all common faults on wiring Schemes, installed TIA568A/B, USOC and ISDN Standards, including open circuit wires, shorted pairs, shorts between pairs, crossed pairs, split pairs, pair reversals and shield/screen continuity. In addition, the Lancaster Pro ST has a large backlit screen.

As with the standard Lancaster, the ProST can check installed wiring networks, alerting the operator if any telephone services are active on the cable under test and can test for and indicate any other active services (10MB/s, 100MB/s, Token Ring etc) to prevent accidental testing of a live network. In addition, a built-in tone generator (oscillator) transmits a warbling tone into the cable enabling detection and tracing using a standard probe receiver.

Features

  • Certifies cable continuity to TIA568A/B
  • Records 1000 test results
  • Large 128 x 64 pixel LCD with backlight
  • Multi-lingual customisable certification software
  • Displays time and date for recording test data
  • Measures length of all 4 pairs
  • 150m (500ft) measuring range
  • Voltage warning and test inhibit
  • Indicates all common wiring faults inclduing split pairs
  • Measures and identifies length to fault
  • Instant graphical display gives unambiguous fault indication
  • Rugged palm-top design weighs less than 390g
  • Complete with 1 active remote unit and test leads
  • Up to 16 unique intelligent remote units/office identifiers
  • Up to 7 hours continuous battery life
  • Supplied with carry case
  • Scratch resistant display

Specifications

Cable Types

UTP & STP

Length Measurement 0 - 150m or 500ft
Faults Indicated Short Circuit Pair
Battery Life Indication 0 to 100%
Open Circuit Wire Main Unit Display Dot Matrix LCD
Short Between Pairs Remote Unit Display Green/Red LED
Split / Cross Pairs Power Supply 4V 4 x AA cells (provided)
Pair Reversals Battery Life 100+hrs Cont.
Shield Continuity Operating Temperature 0 to 40 deg.C
Fault Location Near or Remote End Storage Temperature -20 to 70 deg.C
Wiring Schemes TIA568A/B, USOC & ISDN Weight 385 gms
Service Indication Telephone, 10Mbit, Dimensions 165 x 90 x 37mm
100Mbit, Token Ring Safety IEC61010-1
Tone Generator Oscillating 810 / 1110Hz EMC EN50081 / 50082

*Measurement accuracy of +/-1% assumes the instrument setting for velocity
of propagation (Vp) of the cable under test to be accurately set, homogeneity
of the Vp along the cable length, and accurate cursor positioning.

 
 

Package Contents:
The Lancaster comes complete with:
Active Remote Unit number 1 and
2 x 100mm Screened Patch Leads

Optional Accessories:
Active Remote Units numbers 2 - 16
Carrying Case for main units and Remotes
100mm Screened Patch Leads
100mm Unscreened Patch Leads
Custom Lead Sets upon request

Price:
LanCaster and included accessories: £285.00
Additional Active Remotes (up to 16): £32.00

All prices exclude VAT and delivery (next day delivery £9)

To order please call Rik Alexander +44 (0)118 989 2777 or email us

 

Home&&LanCaster&& Trackballs&& Cable Testers&& Agency&& About&& Contact&&Terms & Conditions

© ComputerWare 2010